|
Web Retail
Catalog
Email
Phone
Services
| |
|
AMSOIL Ea
By-Pass Oil Filters
(EaBP) provide the best possible filtration
protection against wear and oil degradation. Working in
conjunction with the engine’s full-flow oil filter, AMSOIL Ea By-Pass
Filters operate by filtering oil on a “partial-flow” basis. They draw
approximately
10 percent of the oil pump’s capacity at any one time and trap the extremely
small, wear-causing contaminants that full-flow filters can’t remove. The
AMSOIL Ea By-Pass Filter typically filters all the oil in the system several
times an hour, so the engine continuously receives analytically clean oil.
 |
Higher
Efficiency AMSOIL EaBP Filters have an efficiency of 98.7 percent at
two microns. At normal operating RPMs the EaBP Filter will filter all of
the oil in a typical five-quart sump in less than 10 minutes. |
|
Superior Construction The superior construction
of AMSOIL EaBP Filters provides better sealing and increased longevity
along with superior corrosion resistance. AMSOIL EaBP Filters have a
marine powder-coated exterior; and their zinc-dichromate base plates
increase rust protection. EaBP Filters have a nitrile HNBR gasket and an
orange silicone anti-drain valve. The two-stage pleated and layered
cellulose/full synthetic media has an efficiency rating of 98.7 percent at
two microns. |
|
Longer Lasting When used in conjunction with
AMSOIL motor oil and an AMSOIL EaO or Donaldson Endurance™ Full-Flow
Filter, EaBP Filters should be changed every other full-flow filter change
up to 60,000 miles. When used with other brands of motor oil or full-flow
filters, EaBP Filters should be changed every other full-flow filter
change. AMSOIL recommends using oil analysis when extending oil drain
intervals. |
|
Ea By-Pass Oil Filter (EaBP)
Engineered for Outstanding
|
Oil Filtration Efficiency |
|
Increased Oil Capacity
The increased fluid system capacity and filtration life provides improved
oil cooling and ensures that equipment constantly runs on clean oil.
|
|
Engine efficiency is increased, providing
extended engine life. |
|
Soot Removal
AMSOIL has designed a high-efficiency by-pass filter element that is
also a soot removal device. AMSOIL Ea By-Pass Filters use a
synthetic/cellulose sandwiched media. The inner layer of the element is
composed of a highly efficient cellulose media covered with a full
synthetic media outer layer. According to ISO 23556 testing, these filters
remove 39 percent of soot contaminants less than one micron. Soot removal
efficiency increases approximately 10 to 14 percent when the EaBP Filter
is used in conjunction with a standard full-flow filter. |
|
 |
By-Pass Filtration Benefits
|
• Dramatically Extended
Drain Intervals |
|
• Improved Oil Cooling |
|
• Increased Filtration
Capacity and Life |
|
• Increased Fluid System
Capacity |
|
• Efficient Small Particle
and Soot Removal |
|
• Significantly Extended
Engine Life |
|
• Equipment Constantly Runs
on Clean Oil |
|
• Increased Engine
Efficiency |
|
• Remove Particles Less Than One Micron
 |
 |
|
Click For Free Catalog
